Truck-mounted air compressor that uses 180 PSI of air from a truck-mounted system Hepa filter duct cleaning machine that is hooked into your furnace or HVAC system. A ten-inch hose is attached to the return and supply vent to capture the dirt and dust that will be cleaned out of the ducts. The machine produces 2500 cubic air per minute sucking the contaminants out.
All ducts are covered so that it forces the air to focus on each vent as they are cleaned, increasing the air pressure throughout the system.
Air wash - small holes that push the air through
Air whip - a tool that knocks out any stubborn dirt/dust that doesn't come out using the high-pressure system
The push/pull method helps move the dirt through the system as we move down the duct-work until it's fully cleaned from beginning to end.
Air returns and supplies are also vacuumed and cleaned before they are removed. Covers are then removed so that the area inside the return can be thoroughly cleaned. After using the air wand, the whip is used afterward to ensure a thorough cleaning. Finally, vent covers are replaced.
Visit: Hydro Clean Duct Cleaning
Comments
Post a Comment